The Qbitus Q-Care 2 cushion is a contoured, multi-layered cushion range giving excellent posture control and adduction (optional abduction), lateral control and integrated IT bar for added security. Offered in a choice of foams and styles to suit your clients needs.
Q-Care 2
Product Code: S30
| Polymeric gel insert | For increased comfort |
|---|---|
| Profiled seat | For maintaining correct posture |
| Optional abductor | Available for increased postural support |
| Hip guides | For increased lateral support |
| Velcro attached adductors | Provide individual adjustment |
| Sizes | Up to 18” x 18”. All cushions are 3” in thickness. Larger sizes available POA. |
|---|---|
| Cover | Supplied as standard with a vapour permeable cover with integrated non slip base, with towelling material as an option. Inner vapour permeable liner included as standard. All relevant cleaning, safety, technical and installation information printed on rear of cover. |
| Foam Insert | Q-Care cushions are constructed of three layers. Firstly a base of CM65 load bearing foam, then a seat well of Pudgee polymeric gel foam with a top layer of RX39, for finish and integration. |
| Risk Category | Very High |
| Weight Guide | For maximum comfort, durability and performance the weight guide on a 17”x17” is 16 Stone (102kg). The addition of a 1” crescent base increases the load bearing by 30%. |
| Support Pressure | 1 1/3 lbs per square inch at 50% compression or deflection |
| Linear Load Limit | 29 stone (184kg) on a typical 17”x17” cushion |
