Mercury 100 Xtreme


Mercury 100 Xtreme

A seating component with a more aggressively dynamic profile than the standard Mercury 100, designed for low to medium risk users needing a high degree of posture control, incorporating built in adduction and abduction, shaped to enhance the maximum surface contact area for an even pressure distribution and where the self transferral process is not an option or an issue.

Sizes: Up to 20”x18”. Larger sizes are available upon request. Height is approximately 2 ” in the seating area, bariatric sizes may be thicker to accommodate higher loadings.

Cover: The cover is constructed from a vapour permeable clinically proven material, chosen for its medical performance, durability and ease of use. It is fitted with a heavy duty concealed zip with an easy to reach and use bright yellow slider in a concealed envelope. A non slip base and inner vapour permeable liner are added for security and hygiene. All relevant safety, clinical and maintenance information is boldly printed on the rear.

Foam Insert: A low profile moulded cold cure foam chosen for its characteristics of durability, control, long term comfort and reliability.

Risk Category*: Low/medium, comfort with posture control

Weight Guide†: For maximum comfort, durability and performance the weight guide on a 17”x17” cushion is 17-18 stone (108-114kg)

Support Pressure: 1 ½” per square inch at 50% compression or deflection

Linear Load Limit: 31 stone (196kg) on a typical 17”x17” cushion

* Risk categories are given as a guide and rely on your judgement and experience.
† Weight Guides are a general indication of an ideal user weight to give optimum durability,
comfort and performance; it is not a definitive or maximum value.
(This product has been tested to 325lb (146kg) without failure).

Comments are closed.