Q-Care 1 & Q-Care 2

Q-Care 1 and Q-Care 2

Q-Care 1 and Q-Care 2

A new range of high performance seating compontents, based on the original and highly regarded Q-Care cushion. A contoured, multi-layered cushion range giving excellent posture control and adduction (optional abduction), lateral control and integrated IT bar for added security. Offered in a choice of foams and styles to suit your clients needs.

Sizes:    Up to 18” x 18”. All cushions are 3” in thickness. Larger sizes available POA.

Cover:    Supplied as standard with a vapour permeable cover with integrated non slip base, with towelling material as an option. Inner vapour permeable liner included as standard. All relevant cleaning, safety, technical and installation information printed on rear of cover.

Foam Insert:    Q-Care cushions are constructed of three layers. Firstly a base of CM65 load bearing foam, then a seat well of RX39 (Q-Care 1) or Pudgee polymeric gel foam (Q-Care 2); with a top layer of RX39, for finish and integration.

Risk Category*:    Q-Care 1: Low/medium–comfort, Q-Care 2 (Original): Medium/high

Weight Guide†:    For maximum comfort, durability and performance the weight guide on a 17”x17” for both versions is 16 Stone (102kg). The addition of a 1” crescent base increases the load bearing by 30%.

Support Pressure:    11/3 lbs per square inch at 50% compression or deflection

Linear Load Limit:    29 stone (184kg) on a typical 17”x17” cushion

* Risk categories are given as a guide and rely on your judgement and experience.
† Weight Guides are a general indication of an ideal user weight to give optimum durability, comfort and performance; it is not a definitive or maximum value.
(This product has been tested to 325lb (146kg) without failure).

Comments are closed.